Sandman Intro
FEATURES
EASE OF USE
-
Front-facing display screen
-
Large, backlit buttons
-
Fluid-resistant display screen
-
Can run on external battery
-
Memory card
-
Automatic patient reminders
FULLY INTEGRATED
-
Integrated HC heated humidifier
-
Single electrical connection for both CPAP and heated
humidifier
-
Sandman™
therapy software
AUTOMATED
-
Automatic altitude and barometric pressure change
compensation
-
Internal universal switching power supply
-
Automatic leak compensation
-
Automatic light dimmer
DESIGNED WITH COMPLIANCE IN MIND
The Sandman Intro CPAP device was designed with input from
users and clinicians to improve patient compliance with
therapy. The result is a device that easily fits into
users’ lives and delivers quality performance, comfort and
convenience.
SMALL FOOTPRINT
While offering one of the smallest overall footprints
available, the compact Sandman Intro CPAP device
incorporates a fully integrated heated humidifier for
enhanced breathing comfort. The humidifier is discreetly
located at the rear of the device with a water chamber and
filter that are easy to remove for cleaning. And, even with
the integrated humidifier, the device remains lightweight
and robust enough for nightly use at home or on the road.
Measurements:
-
6.9” wide, 7.5” deep, 4.7” high
-
2.5 lb without humidifier and 2.65 lb with humidifier
FOCUS ON USABILITY
Numerous user-friendly features on the Sandman Intro CPAP
help to make the device easy to live with. Such features
include automatic patient reminders, ultra-quiet operation
and a front-facing display screen with large backlit buttons
that dim automatically after use.
SPECIFICATIONS
PERFORMANCE
CPAP PRESSURE AND FLOW GENERATION PROCESS:
Air pressure and flow generated by a centrifugal blower with
dynamic pressure regulation
PRESSURE OUTPUT:
3 cm H20
to 20 cm H20
(+/- 0.6 cm H2O)
FLOW OUTPUT:
200 LPM @ 20 cm H2O
with all leak flow included
OUTLET GAS TEMPERATURE:
Maximum gas temperature at the patient outlet: 106°F (41°C)
NOISE LEvEL:
26 dB at 1 meter with ISO17510-1
OPERATIONAL MODE:
Constant pressure, no auto-adjust
RAMP DURATION:
0, 5, 10, 15, 20, 25, 30, 35, 40, 45 minutes
RAMP STARTING PRESSURE:
3 cm H20
to prescription pressure
HUMIDIFIER TYPE:
Heated or pass-over, passive vapor-phase transfer of water
into the inspiratory airflow
HUMIDIFIER WATER CHAMBER CAPACITY:
350 ml (11.75 oz)
HEATER ADjUSTABLE RANGE AND WATTAGE:
0-10 adjustable, 5.
4 watts at setting 1, 40 watts at setting 10
PHYSICAL CHARACTERISTICS
SIZE:
6.9” wide X 7.5” deep X 4.7” high (17.5 cm X 19cm X 12cm)
WEIGHT:
2.5 lb (1.13 kg), 2.65 lb (1.20 kg) with heated humidifier
FILTERS:
Cleanable and high-efficiency
POWER
CHARACTERISTICS
POWER SUPPLY:
Input range 100-240 V, 50-60 Hz
POWER CONSUMPTION:
50W without humidifier 90W with humidifier at maximum
setting
ENVIRONMENTAL REQUIREMENTS
OPERATING TEMPERATURE:
41°F to 95°F (5°C to 35°C), 10% to 95% relative humidity (RH),
non-condensing
STORAGE TEMPERATURE:
-4°F to 140°F (-20°C to 60°C),
¡Ü95%
relative humidity (RH), non-condensing
OPERATING ALTITUDE:
0 to 9000 feet (2,743 meters)
