Regularly cleaning your AirMini machine will help you enjoy top
quality therapy for a very long time. Disassembling, cleaning and
regularly checking your machine are all part of good maintenance for
your high quality CPAP.
How to disassemble AirMini
For F20 and N20 only:
Gently remove the connector from the mask of the CPAP. Make
sure to keep the side buttons pressed and pull away.
For F20 only:
Disconnect the AirMini tubing system. Disconnect the F20
connector from the tubing system by twisting and then pulling
apart.
AirMini tubing disconnect for N20 and AirFit P10 only:
Make sure to disconnect the ventilation module from the
tubing system of the AirMini. Gently twist and then pull apart.
Disconnect the mask from the vent module. Gently twist and
then pull apart. HumidX or HumidX Plus must be removed from the
ventilation module.
*It is extremely important to keep in mind that HumidX or
HumidX Plus are not washable.
Unplugging the AirMini machine
Press the side buttons on the cuff and pull away to
disconnect the AirMini tubing system from the machine itself
Next, unplug the power supply unit from the power source +
the machine
In order to disassemble the mask, please check the user guide.
When you detach all the components of the machine, you must make
sure to store HumidX/ HumidX Plus in a dry and clean location.
However, each time you disassemble/clean your machine you should
carefully inspect the HumidX humidifier system.
Check for any signs of wear and tear, damage or possible
blockage.
Ensue to replace your HumidX/HumidX Plus every 30 days
Always store in a clean and dry place your humidifier when
not in use.
You cannot wash the HumidX/ HumidX Plus components
Thoroughly cleaning the AirMini Tubing system
Carefully inspect the air tubing system at least once a week
Ensure to replace your AirMini tubing system once in 6
months
Gently wash the tubing system using lukewarm water and a
mild dishwashing detergent
Rinse thoroughly and let air dry
If you notice any cracks, holes or other signs of wear/tear
you should immediately replace your AirMini tubing system
*Never wash your AirMini tubing in the
dishwasher/washing machine.
Cleaning & maintenance for the F20 Connector for AirMini
Check and clean the F20 connector of your machine on a daily
basis
Wash the connector in lukewarm water using a mild detergent
Thoroughly cleanse it by using a brush with soft bristles.
Rinse under running water. Let it air dry.
Check once more if there is any blockage in the vent holes
(dirt, dust, etc.)
Cleaning & Maintenance of N20 connector for AirMini
Check and clean the N20 connector on a daily basis
Replace the connector every six moths
Always wash the connector in lukewarm water by using a mild
detergent
Clean it using a brush with soft bristles
Pay particular attention to the vent holes you can find
within the connector.
Rinse under running water. Let it air dry.
Do not wash the N20 connector in the dishwasher/ washing machine.
Changing air filter for your AirMini machine
Replace the air filters every six months for proper
operation of your AirMini. You cannot wash the air filter.
Replace it sooner if you notice any signs of wear and tear,
holes or any blockage.
How to change the air filter
First, slide the cover of the filter off and remove the
filter
Insert the new filter
Replace the cover of the air filter
In order to prevent water or dust from entering your machine, you
must ensure that the air filter cover is fitted properly at all
times.
AirMini tubing system, connectors, HumidX / HumidX Plus
humidifiers and the vent module must be replaced because they cannot
be disinfected and used on a shared basis between patients.
Just in time for
the holidays, purchase the AirMini with SetUp Kit and Mask for
$899.00 a $100.00 off our everyday price.
Get the Equipment you want now and pay over time
with Bread*
Affordable Monthly Payments
Pay over 24 months at competive rates, or
pay over 6 months at a low 0% APR**. No prepayment penalties.
Fast and Easy Online Application
Click on "Apply With Bread" to go to Bread's web page.
***Subject to approval of credit application. Rates range from 0% to 29.99% APR, resulting in, for example, 24 monthly payments of $46.14 at 9.99% APR, per $1,000 borrowed. APRs will vary depending on credit qualifications, loan amount, and term. Bread® pay-over-time plans are loans made by Comenity Capital Bank